LEVEL

This Command allows the various Levels associated with UIPACK (Echo Level etc.) to be changed.

Parameters

LEVEL

New Level. This may be one of the following:-

DISABLED        Disabled

SWITCHED        Switched

ENABLED         Enabled

Qualifiers

/ECHO

Specifies that the current UIPACK Echo Level should be modified. This overrides the default of the Output Level being modified.

/ERROR

Specifies that the current UIPACK Error Level should be modified. This overrides the default of the Output Level being modified. Note that only Levels DISABLED or ENABLED are relevant for this.

/FLUSH

Specifies that the current UIPACK Flush Mode (Level) should be modified. This overrides the default of the Output Level being modified. Note that only Levels DISABLED or ENABLED are relevant for this.

/OUTPUT

Specifies that the current Output Level should be modified. This is the default in the absense of any Qualifiers.

If it is desired that several Operation Levels be modified then several Qualifiers may be specified. Qualifiers may be attached either to the Keyword or to the Level and thus the following is legal:-

LEVEL/OUTPUT ENABLED/ECHO