| Subject |
Status |
Conclusions |
Comments |
|---|---|---|---|
| Study of valid tracks with large
Delta(3-5-7) (using CMX) |
Done |
||
| Addition of CMP information to
CMUP test trigger |
Ongoing |
Aron |
|
| Re-optimization of pointing cuts |
Ongoing |
Aron |
| Subject |
Status |
Conclusions |
Comments |
|---|---|---|---|
| Optimization of efficiency
vs d357 |
Done |
-Delta(3-5-7) < 25 is in the
plateau,
efficiency (full luminosity range) drops by about 0.5% when going to
SL3 mask only, efficiency vs Delta(3-5-7) shape stays the same for high
luminosity |
| Subject |
Status |
Conclusions |
Comments |
|---|---|---|---|
| Efficiencies |
|||
|
versus
luminosity (offline) |
Ongoing |
Going to the valid track
approach reduced luminosity dependence. |
|
|
as
a function of L3 bits |
Done |
CMX ~95% sloped, CMUP ~98% flat,
CEM ~99% flat wrt L3 |
|
| Trigger Rates |
|||
| projections (HTTF) | Done |
Matches data rates |
|
| online (XMon-Pre-Shutdown) | Done |
Rates as predicted by offline
studies |
|
|
online
(XMon-Post-Shutdown) |
Done |
Show good agreement with
pre-shutdown results |
|
| Timing |
|||
| versus luminosity | Done |
||
| versus # of tracks | Done |
||
| Number of Attempted Tracks |
|||
| for different triggers | Done |
Behavoir seems reasonable. |
|
| versus instanteous luminosity | Done |
CMX ~1.1, CMUP ~1.1, CEM ~1.3 |
|
| Stereo Reconstruction Efficiency
& Rate Reduction |
|||
|
efficiency (L3
Bits) versus
luminosity (online) |
Done |
CMX ~96% some slope, CMUP ~97%
flat, CEM ~99% flat wrt L3 |
|
| efficiency (L3 Bits) versus # of tracks | Done |
||
|
Find
and solve source of reconstruction inefficiency |
Done |
99.8% Efficiency versus offline |
|
| Using Recent Data to Compare
Online and Offline |
|||
|
ROL0 pixels from data to check Z0/cotan |
Done |
Agreement between online and
offline |
|
|
ROL0 pixels to check decision |
Ongoing |
Rob |
|
|
ROL0 pixels
to study difference between axial and offline or L3 tracks |
Ongoing |
Charles |
| Subject |
Status |
Conclusions |
Comments |
|---|---|---|---|
| Change Reconstruction code to
auto accept based on regions |
Done |
Offline |
| Subject |
Status |
Conclusions |
Comments |
|---|---|---|---|
| of Efficiency |
Done |
Stable, both in magnitude and
slope for a set of matching requirements similar to the default one. We
should continue to use the default. |
This is what we want. |
| of Resolution |
Ongoing |
Rob |
| Subject |
Status |
Conclusions |
Comments |
|---|---|---|---|
| Making both triggers available
to the trigger table |
Done |
| Subject |
Status |
Conclusions |
Comments |
|---|---|---|---|
| Done |
Current digitization method is
adequate |